Hello Readers!
As some of you may know, Philip and I are on a coast-to-coast adventure to appreciate and re-create gorgeous beautiful things from the past.
(And be sassy biz-natches the whole way!)
(And be sassy biz-natches the whole way!)
We have always shared a burning desire for custom-made gloves, ever since we saw Barbra slip them over her extra-long manicured nails in "Hello, Dolly".
Babs had gloves made with extra-long fingers to accommodate her beautiful hands in historical films like Hello, Dolly!, Funny Girl, and our personal favorite: On A Clear Day You Can See Forever. |
Glove patterns are pretty damn near impossible to find, but we got lucky when Philip found this little gem from 1940's wartime:
This old pattern journeyed from New York to California! |
I started the painstaking process of tracing and interpreting the tiny, fragile pieces.
Falling Apart: Brittle directions page and glove pattern pieces for fingers and thumbs. |
Close-up of the revision date in these hand-illustrated instructions. Last revised: June 30, 1943!! |
Don't forget to copy the front and back of the envelope! |
So, the first thing to do is copy the directions as quickly and carefully as possible. As soon as you're done, fold the original back up and put away ASAP.
Sadly, the paper that these directions were printed on is so dry that it wanted to crumble and tear at the slightest touch!
I opened the directions ONE TIME ONLY, and carefully copied all sides on the xerox machine to 11x17" paper.
Sadly, the paper that these directions were printed on is so dry that it wanted to crumble and tear at the slightest touch!
I opened the directions ONE TIME ONLY, and carefully copied all sides on the xerox machine to 11x17" paper.
Before pulling out the pattern pieces, be sure to give those directions (the copy, of course) a good read-through. Take note of any special markings or symbols. Get to know the pieces through the pattern layout and instructions.
I traced all pieces as they were, marking all punch holes and symbols:
Once I double-check, then triple-check that all info has been properly captured, I immediately put alllll the pieces back in the envelope.
I traced all pieces as they were, marking all punch holes and symbols:
Some of the teenie-tiny pieces for the fingers were falling apart, so I had to machine copy, then re-draw. (no pressure, RIGHT?!) |
Now the old pattern can officially go back in its cool, dry, dark storage space :)
This first tracing, as seen in images above, is the true original pattern. I will keep it unchanged so I never have to pull out the old fragile pieces again.
Then, I trace a 2nd copy from the 1st unchanged tracing.
On this 2nd copy, I clean up the overall shape and "translate" the old pieces by changing the punch holes to clear printed labeling of the grainlines, seam allowance, details, and piece name. |
This is where the pattern goes from copy to customize, and our own design adjustments are made!
Philip and I want to create a glove pattern with adjustable finger lengths. So, I added a slash line through the fingertips of all pieces where length can be lengthend or shortene. (BLUE LINE)
This fresh, new pattern, along with copies of the original instructions and envelope, are neatly packed in a clear plastic sleeve, and shipped post-haste back to Brooklyn for Philip to test out:
Philip and I want to create a glove pattern with adjustable finger lengths. So, I added a slash line through the fingertips of all pieces where length can be lengthend or shortene. (BLUE LINE)
Close-Up of revised pattern for the glove body. |
Philip will begin mocking up our new pattern, testing the fit and construction, and make notes of any changes or progress. |
Always plan for the "what if's"....
Yay!